电话:15685359870
手机:15685359870
QQ:3165088973
邮箱:3165088973@qq.com
地址: 贵州省安顺市西秀区北街街道虹山湖路42号虹山大酒店（百灵.希尔顿逸林酒店 )幢14层9号
DS200ADCIF1ABA kit has two PROM modules
DS200ADCIF1ABA kit has two PROM modules
The GE Genius adapter board DS200ADPAG1ABB has a 40-pin connector and a 26-pin connector.It also has a 3-pin connector and a 10-pin connector.The GE Genius adapter plate DS200ADPAG1ABB has holes for you to use when replacing the plate.The board is 8.5 inches long and 2.75 inches high.There are specific spots inside the drive designed specifically for the circuit board, with the screw holes lining up with the holes on the circuit board.After the drive is powered down and you have tested the drive to verify that it is safe to touch the internal components and circuit board, locate the DS200ADPAG1ABB and check a few factors before removing it.First, note where the circuit board is in the drive and where it connects to the drive.The service person will install the replacement board in the same location, and it's a good idea to note any boards or cables that might block access to the board.Be prepared to move any cables that block access to the drive or have fragile components that you want to avoid bumping.Also pay attention to the cables connected to the circuit board and how the cables are routed in the drive.It is important to route the cables in the same manner because the sensitive signals carried by the cables are easily interfered by the power lines.Additionally, airflow is important to keep components cool, and incorrect cable routing can interfere with the free flow of air.
Contact: Manager Li
Tel: 15685359870
Mobile: 15685359870
QQ：3165088973
Email: 3165088973@qq.com
