Turbine control system DS200ADPBG1ABB adapter board

Turbine control system DS200ADPBG1ABB adapter board

The Genius I/O adapter board DS200ADPBG1ABB has a set of 8 switches used to configure the board.The Genius I/O adapter board DS200ADPBG1ABB also has a 40-pin connector and a 26-pin connector.The Genius I/O adapter board DS200ADPBG1ABB is also equipped with jumpers that can be used to help Taylor tailor the board to meet field requirements.Some jumpers have only one support position set at the factory.Jumpers are used by the factory for testing only and will be moved to a supported position once testing is complete.Other jumpers can be moved to configure the board.The written documentation that came with the original board explains the jumpers and defines how moving the jumpers changes the behavior of the board.However, when you replace the board in the drive, consider simply matching the jumper locations on the old board to the new board.Remove the old board and place it in a flat static protection bag on a flat surface such as a workbench or table.You must wear a wrist strap because it provides a path for static electricity to escape from your body and circuit boards to a metal grounded surface.Remove the replacement board from the bag and place it next to the old board.All jumpers have identifiers starting with JP.For example, JP1, JP2, and JP3.Move the JP1 jumper on the replacement board to match the location on the defective board.

Power supply and protection:

Ø Power supply: Dual power redundant input, DC (9-36) V, typical DC24V, power consumption less than 4W, with DC1500V voltage isolation and reverse protection function, industrial terminal interface

Ø Relay alarm output: Fiber optic link fault and power supply fault alarm output, contact capacity: DC48V/1A, industrial terminal interface

Mechanical characteristics:

*External dimensions: 132mm× 105mm× 52mm

*Shell: IP30 protection level, corrugated aluminum reinforced casing

*Installation method: 35mm DIN rail installation

*Net weight: 800g

Work environment:

*Working temperature: -10-70 ℃ (-40~+85 ℃ wide temperature optional)

*Relative humidity: ≤ 90% (non condensing)

*Storage temperature: -40~80 ℃

Test certification:

*EN55022:2010 (RE) Band Width: 120KHz Frequency Range: 30MHz to 1000MHz

*EN61000-4-2:2001 (ESD) Air discharge voltage:± 8KV contact discharge voltage:± 4KV

Criterion: B Level 2

*EN61000-4-3:2006 (RS) 3V/m (80-1000MHz) Criteria: A Level 2

*Test Standards: EN1122:2001 EPA3050B, EPA3052 EPA3540C, EPA3060A

*Testing item: Pb Cd Hg Cr6+PBBs

*Test Results: N.D

The networking structure of the profibus dp redundant fiber optic repeater implementation: