电话:1568535870
手机:1568535870
QQ:3165088973
邮箱:3165088973@qq.com
地址:贵州省安顺市西秀区北街街道虹山湖路42号虹山大酒店（百灵.希尔顿逸林酒店 )幢14层9号
DS200CSSAG1A Two 40-pin connectors
DS200CSSAG1A Two 40-pin connectors
he GE Battery Status Sensor Board DS200CSSAG1A contains two 40-pin connectors and is 4 inches high and 11 inches wide.It also contains a 4-pin connector and a 9-pin connector.The replacement GE battery status sensor board DS200CSSAG1A may be an updated version of the older board.You may notice that components are located in different locations on the board, and the components may also look different after visually inspecting the board.However, despite the differences, replacing the board after installation will provide the same functionality as the old board, and compatibility between the old and new boards is guaranteed.You can also install the new board in the same position in the board rack, with the mounting holes aligned with the matching holes in the rack.If new hardware is not included with the replacement, install the new board using the same screws and washers from the old board.It is important to use washers with the screws as they ensure the screws stay tight.The drive is subject to vibration during normal operation, which can cause screws to loosen and become dislodged.Do not use excessive force to drive the screws into place.The board is made of materials that are fragile and prone to cracking or breaking.The washers also help prevent breakage of the board during screw installation.Get a clear view of the installation so the screwdriver doesn't scratch or damage other components in the drive cabinet.
